|
|
A
SHOW CASE OF HAI ACCESSORIES
TheOMNI TOUCH Screen . . .
The
OmniTouch
is a colourful “plug and play” touchscreen interface
for the award winning Omni Family of integrated security
and home automation controllers. It’s responsive
icons facilitate control of lights and appliances,
monitoring and adjustments of security and temperatures,
including outdoor temperature and humidity, pool and
spa temperatures, ventilation, decorative lighting
and other items under control of the Omni-family system.
With
its elegant appearance, simplicity in regards to programming
and use, the OmniTouch is in a class all its own,
commented HAI President Jay McLellan. “Its affordability
makes touchscreen control available to a much larger
segment of the population.” OmniTouch is self-configuring
based on the programming of the Omni-family controller. There
is no programming , which can be complex
and expensive in competitive systems. Changes made
on the Omni-family system automatically show on the
touchscreen, allowing the customer or installer to
maintain and reprogram the Omni-family system remotely.
|
|
 |
Model
33A00-1, and model 33A00-4 (has microphone and speaker
built in) the OMNI Console features larger buttons
for easier viewing and operation, and can be surface
mounted or flush mounted with optional flush mount kit.
This
console can be used with any Omni family controller
(OmniLT, Omni II, and OmniPro II) and can be mounted
on the surface of the wall or flush in the wall with
the optional flush mount kit.
|
| |
|
| |
|
| |
|
 |
The
PESM (Programmable Energy Saver Module) is used
to override existing thermostats for set-back control.
It can also be used for sensing and controlling other
temperatures, such as attic fans, garage fans, greenhouses,
basements, wine coolers, humidors, etc. Can also be used
to control spa heaters with remote temperature sensor.
The PESM reports temperatures to the controller, and has
a low voltage relay and LED indicator for control. The
PESM doubles as a freeze sensor, which can cause the controller
to dial out in the event of a furnace failure. |
|
 |
Model
14A00-1 Outdoor Temperature Sensor Model 14A00-1
This mounts in an outdoor location to send the outdoor
temperature to the HAI controller. It is coated with
a sealant to resist moisture. Supplied with stainless
steel mounting screws and waterproof connectors.
|
| |
|
 |
Model
14A00-8
Water Temperature Sensor
The
14A00-8 is a temperature sensor used to monitor the
temperature of pools, spas, aquatic ponds, and
greenhouses. The temperature sensing device is potted
in a stainless steel probe. It is designed specifically
to monitor water temperature from the return/source
and then report that information back to an HAI Omni
Family controller. Supplied with stainless steel
mounting screws and waterproof connecto
|
| |
|
 |
Model
31A00-1
Indoor/Outdoor Temperature Sensor
Model 31A00-2 Indoor/Outdoor Temperature and
Humidity Sensor
The
Model 31A00-1 and Model 31A00-2 Indoor/Outdoor Temperature
Sensor is used for sensing outdoor or indoor temperature.
It is coated with a sealant to withstand outdoor moisture
and features a new, high accuracy temperature sensor
that doesn’t need calibration. The temperature
can be used to activate programs for controlling
temperatures in attics, garages, greenhouses, basements,
wine cellars, and coolers. The temperature can be displayed
on the console or spoken over the telephone. It can
also report, log, alert, or generate an alarm if the
temperature reaches freeze conditions or if the temperature
goes above the high setpoint or drops below the low
setpoint programmed in the system.
The
Model 31A00-2 also includes a Humidity Sensor that is
used for reporting the outdoor or indoor relative
humidity from 0 to 100 percent. High and low humidity
limits can be set for taking action (i.e. turning on
the bathroom vent fan, running a/c in de-humidification
mode, turning on humidifier in heating mode, etc.) or
reporting high or low humidity conditions in homes,
greenhouses, wine cellars, coolers, humidors, etc. Controlling
humidity is particularly helpful in combating the growth
of mold in vulnerable areas of the home, such as bathrooms,
basements, attics, etc
|
 |
Model
21A05-2
Serial Cable -NEW!
This
cable connects the built in serial port of an OmniLT,
Omni II or OmniPro II controller to personal computers
for HAI Web-Link II, HAI Windows PC Access, and other
systems DB-9F connector
|
| |
|
 |
Model
22A00-1
OmniLT Expansion Module
This
module expands the OmniLT by adding 16 zones and 8 voltage
outputs with overload protection and reset. The module
comes with mounting hardware and cable to attach
to the OmniLT controller. The 16 zones can be programmed
for burglary, temperature or auxiliary inputs. The 8
outputs have individual overload protection, with overload
indicator and reset bu
|
| |
|
 |
Omni
LT - is the first integrated security and home automation
system designed to meet the needs and budgets of residents
who live in smaller homes, townhouses and apartments as
well as SOHO applications. This fourth generation of controller
has recieved the U.S. Security Industry Associations highest
honour for residential products, the Judge’s Choice Award,
and was a 2001 top 50 Editor’s Pick by Home Automation
Magazine! |
 |
Model
17A00 Expansion Enclosure
The
Model 17A00 Expansion Enclosure adds sixteen voltage
outputs for control and sixteen inputs for additional
security/fire zones, auxiliary or temperature
inputs. The 17A00 can be mounted up to 1000 feet
from the main controller and has it's own power supply
and battery. It is commonly used for sprinkler systems,
control of pumps, motors, remote control circuit
breakers, and additional security/fire zones. Up to
four Expansion Enclosures can be used in conjunction
with the HAI OmniPro or OmniPro II controller. Optional
Model 19A00 8-Relay Module and Model 10A07 4-Relay Module
mount in the enclosure!
|
| |
|
 |
Omni
II - is HAI’s fifth generation controller designed for
residential and small business use. It includes integerated
UL-Listed security for enhanced safety, HVAC and lighting
control for energy management and the convenience of telephone
and Internet access and control. This all new design incorporates
more features, power and enhanced reliability than ever
been available before! |
| |
|
 |
Model
18A00-1
Omni Demo System
The
Model 18A00-1 Omni Demo System is a comprehensive package
which includes the HAI Omni Controller, RC-80 Programmable
Thermostat, Omni Surface Mount LCD Console, Demo Board
Adapter Kit, TW-523 and Touch Tone Speakerphone. Packaged
in an attractive robust case, the Omni Demo System allows
HAI dealers to actively demonstrate all automation and
control features in the HAI product line. Kit comes
fully assembled and programmed with factory defaults
|
 |
Model
10A06
16 Zone Hardware Expander
This
module adds 16 fully configurable input zones to an Omni,
Omni II, and OmniPro II systems. The module comes with
mounting hardware and cable to attach to the controller.
Terminals are provided for 16 additional zones that
can be programmed for burglary, fire, temperature
or auxiliary inputs. Up to 2 modules can be installed
on the Omni II for an additional 32 zone inputs.and up
to 4 on OmniPro II for an additional 64 zone inputs. |
| |
|
 |
The
Model 18A00-5 Demo Board Adapter Kit is a pre-wired
circuit board that plugs into the terminal sockets on
all HAI controller products. It is used in HAI Demo
Systems and is now available to dealers for showroom displays,
model homes, and other product demonstration applications.
Features include quick connect to console, thermostat,
telephone, PC and 24 VAC transformer plus phone
line simulator, modular jacks for phone and console
connections, built in temperature sensor simulator, and
two switched zones for security demonstration. |
| |
|
 |
Omni
LT - is the first integrated security and home automation
system designed to meet the needs and budgets of residents
who live in smaller homes, townhouses and apartments as
well as SOHO applications. This fourth generation of controller
has recieved the U.S. Security Industry Associations highest
honour for residential products, the Judge’s Choice Award,
and was a 2001 top 50 Editor’s Pick by Home Automation
Magazine! |
 |
Model
10A11
Two-Way Voice Module
The
Model 10A11 Two-Way Audio/Voice Alarm Module allows
two-way communication with a central station after an
alarm, paging and listening from an on-premises
or remote phone, annunciation of alarm and zone
by voice, and voice messaging*. The Model 10A11 can
be used with OmniLT, Omni, Omni II, OmniPro and OmniPro
II automation controllers.
*Voice messaging not available on all systems
After
an audible alarm, the module allows the central station
to control the listen/talk mode. After a silent alarm,
the module allows listen in only.
|
| |
|
 |
Model
28A00
Speaker/Microphone Module
The
Model 28A00-1 and -2 is a speaker and microphone
assembly that allows two-way communication with a central
station after an alarm, paging and listening from
an on-premises or remote phone, annunciation of alarm
and zone by voice, and voice messaging*, when connected
to a Two-Way Voice Module. It may be used outdoors
in weather protected areas.
*Voice
messaging not available on all systems
Two
versions are available:
- Model
28A00-1 Surface Speaker/Microphone Module
Dimensions: 5 3/16" H x 5 3/16" W x 2 5/8
D
Model
28A00-2 Flush Speaker/Microphone Module
Dimensions: 4 1/2" H x 4 1/2" W x 1 1/2"
D (Protrudes only 1/2" when flush mounte
|
| |
|
 |
Model
10A07 4-Relay Module
Model 19A00 8-Relay Module
Four
or eight separate relays convert HAI voltage outputs
to Form C relay contacts. Contacts rated 5 amps at 24
VDC. LED indicators show which relays are energized.
10A07 is supplied with foam adhesive mounting
tape; 19A00 has mounting holes.
DIN
rail relays also available (6mm wide)
|
|
| |
|
| |
|
| |
|
|
|
|
|
