Automation for every home and every function!

Home Back

 
SMART SECURITY & SURVEILLANCE


Automation products
Click here to see more




SMART EARTH SERVICES

 

SECURITY & SURVEILLANCE

Security has become a big issue in todays society.
The HAI controller provides security in your home as well as automation!

We have color cameras, as well as cameras that see in the dark with infrared light. We also have cameras that are color during the day and then switch to B/W at night for a better night time picture. A DVR can be configured to only record when motion is detected. This saves on hard drive space, but also makes it very easy to play back video from a certain time frame and only see video from when someone was in the area (no more fast forwarding a tape looking for movement and then stopping the tape to play it and see what actually happened). A DVR also eliminates the constant changing of tapes. Simply configure it to automatically record over the oldest recordings.

This could, for example, allow you to always have the most recent 1 month of video available for review, with no maintenance of any kind required. Here are some example applications.
  • Web cameras
  • CCTV cameras
  • Night and day cameras
  • Coloured domes
  • Digital Video Recorders
  • Matrix switches
  • Modulators for TV
  • Multiplexers
  • Camera housings
  • Domes
  • Monitor brackets
  • Monitors
  • Signal convertors
  • Cabling & accessories
  • Reed switches
  • Motion detectors
  • Glass break sensors
  • Smoke alarms
  • Satellite sirens
  • Vibration sensors
  • Strobe lights
  • Laser beams
  • Touch screens
  • Splitters and hubs
  • Pet aware PIR's
  • PIR's with sirens
  • PIR's with cameras
  • Panic pendants
  • Panic buttons
  • Radio keys
  • Keypads
  • Door strikes
  • Magnetic locks
  • Proximity cards
  • Biometric devices
  • Portable monitors
  • Interfaces to guard houses
  • Interface to security
  • Security Software
  • Programming
  • Access devices

Feeling safe at home is possible with advanced technologies monitoring your perimeters inside and outside your home. Watch cameras on your touch screens, TV, IPHONE/IPAD, Android phone, LCD panel form home or anywhere in the world.

 

From access systems to panic systems and all in between our automation controller can service your needs
There is a vast array of highly sophisticated security equipment on the market and most of it can interface to the HAI home automation controller.ou can include gate keeper video intercom systems that show you who is at the front gate or front door and allow you to answer the door from any telephone in the home. You can open the front door from your office over the internet to let a tradesperson in while you're at work. Using cameras in the home you can watch the tradesperson work and lock up after he/she leaves. When the home detects intrusions, it can email, sms or call any one of up to 8 telephone numbers including a guard house or security company or your neighbour. Keyless door entry with biometrics (fingerprint) tells the home controller who is home and who has entered. You can give visitors a time slice during the day to enter your home or stay for weeks and more! You can monitor your empire from any room in the home at any time using video surveillence and remote internet access. The system will interupt TV to show who is at the gate or front door. These and many more external security functions can be governed by the HAI home automation controller and alerts provided. Exterior security can be installed before or after the home automation controller. The HAI controller can replace existing security control systems or enhance these systems.


This bullet style camera boasts a 1/3" Panasonic CCD sensor and 3.6mm lens housed in a rugged black aluminium case. The unit is supplied complete with adjustable mounting base and leads. Designed for outdoor use, the camera is weatherproof, has a viewing angle of 70° and can be mounted under the eves to keep an eye on the front gate, the pool or anywhere else you want to keep under surveillance. The video connector is BNC while the power is 2.1mm DC connector. The camera measures 89 (L) x 26 (Dia.)mm. Power requirement is 12V DC Regulated @100mA. Use our MP-3011
Specifications:
*Supplied Lead: 300mm-2.1mm DC-12VDC, BNC-video
*Sensor: 1/3" Panasonic
*Resolution: 512(H)
582(V)
380 TV Lines
*Min. Lux: 2 Lux
*S/N: >48dB
*Shutter Speed: 1/100000 sec. Auto
*Lens Angle: 70 Degrees
*Power Required: 12VDC Regulated
*Current Draw: 100mA
*Dimensions: 89(L) x 26(Dia.)mm Bullet
*Video Output: 1Vpp, 75 Ohm
*Board Lens: 3.6mm

Don't pay thousands of $$$ for a professional quality Pan/Tilt/Zoom Dome Camera. This PTZ dome camera has features found on more expensive models. Utilises a 1/3 Sony CCD solid-state sensor providing long life and high reliability. It will deliver 480 TV lines of crisp and clear pictures. The camera provides a 350-degree panning angle, 0 - 90 degree tilt range and incorporates a 3X zoom lens.
Other functions include on screen display and menu selectable, RS-485 communication protocol for our Mpeg2 DVR (QV-3073), 2 Channel Web Server (QC-3394) or PTZ controller and receiver connectivity, and it also allows you to have 16 preset camera position.

Specifications:
Sensor: 1/3 Sony Sensor
Resolution: 480 TVL
Video Output: 1.0Vp-p 75 ohm
Signal to Noise Ratio: More than 48dB
Minimum Illumination: 1.5 Lux/F2.6
Aperture: F2.6(wide) - 4.3(tele)
Focal Length: 4.2-12.7mm
Field of View: 26.7-80 degrees

This camera features a water resistance rating to IP57 (the IP57 rating refers to the camera's limited protection against dust ingress - with no harmful deposit - and the protection against immersion in water from 1cm to 1m) - allowing it to be submerged underwater. This makes it ideal for aquariums or virtually any underwater surveillance application.
The camera will operate down to 0-lux, courtesy of 12 infrared LEDs mounted behind a protective glass shield. These IR LEDs automatically trigger-on under low light levels and turn off when suitable levels of light are present. The effective range of the infrared illumination is 10 metres - making the camera ideal for low light-level entrance surveillance, alleyway monitoring, balcony and patio surveillance or any area where suitable covering is unavailable.
When mounted underwater, however, this IR illumination distance may vary. The camera housing is made of a lightweight alloy and is supplied with a swivel mount base and mounting screws. A removable light/rain shield is also included to provide basic protection to the CCD lens from the elements when mounted outside. Use our MP3011 12VDC Regulated Plugpack.

SPECIFICATIONS
Connections: 12VDC / 2.1mm
, Video BNC
Sensor: 1/4" Sony CCD
Pixels: 512 (H) x 582 (V)
Resolution: 330 TV Lines
Lens Angle: 70 degrees
Min. Lux: 2 Lux / F2; 0 Lux (10M IR On)
S/N: > 48dB (AGC off)
Shutter Speed: 1/60 to 1/1,000,000 sec
Power Required: 12VDC +/- 10%
Current Draw: 80mA (IR off), 240mA (IR on)
I/R Range: Up to 10 metres
Dimensions: 65 (D) x 120 (L)mm
Weight: 430g
Video Output: 1.0V p-p Composite, 75 oh
m

This high quality colour dome camera features high resolution, and a genuine Panasomic image sensor for long life and reliability. The camera is mounted inside a darkened dome, so it is ideal for applications where a visible deterrent is also required.
Supply Lead: 300mm, 2.1mm DC socket, BNC socket for video.
This high quality colour dome camera features high resolution, and a genuine Panasomic image sensor for long life and reliability. The camera is mounted inside a darkened dome, so it is ideal for applications where a visible deterrent is also required.
Supply Lead: 300mm, 2.1mm DC socket, BNC socket for video.
Not your conventional type camera, this 1/3 Sharp CCD camera incorporates a downright holder for flush mounting on any ceiling or flat surface. This camera is a perfect alternative to conventional Dome type cameras. It provides 0-90 degree adjustable pivoting camera head for securing that perfect angle. Holder is finished in polished metal giving a classy and stylish look. The unit operates down to 0.1 Lux courtesy of the 12 infra-red LED's which automatically turn on during low light levels.
Specifications:
* Image Sensor 1/3 Sharp super HAD CCD
* Horizontal Resolution: 480 TVL
* Illumination: 0.1 Lux
* Video Output: 1.0Vp-p 75 ohm
* Lens: 6mm
* Power Requirement: 12VDC (+/-10%)
* Current Consumption: 150mA (max)
* Operating Temperature: -20 deg. C - 55 deg. C
   
With a DVR there is little that this unit can't handle. By ultilising the on-board Ethernet connection, you will have an extremely sophisticated remote monitoring system. Connecting the LAN to the internet will further broaden the possibilities. Full control can be obtained from any internet connected computer in the world. Only an internet browser is required, with password authentication required to avoid unauthorised use. If you are using it locally, the well thought out control panel provides operation of many sophisticated features, and a small panel of LEDs provide quick indication of various status and alarm functions. The multiplexer offers an array of display modes with the ability to manually select inputs displayed, as well as the full blown 16 way display. Advanced features such as picture in picture, image zoom, and reverse playback are all there, but then you wouldn't expect anything less from a quality unit like this. Recording can be triggered manually, with timer recording, alarm inputs, and of course digital motion detection.
 

Imagine a camera inside a PIR -or a PIR with inbuilt siren

Equipped with Detection and Monitor Function.
Color Sony Sensor Inside.
Low Illumination and Low Current Consumption.
Fashionable Design.

Specifications
MODEL CPC251
Pick-up Element
[ 1/4" Sony color
Resolution
[ TV Lines ] 350
Min. Illumination 1Lux / F2.0
Number of Pixel 510(H)x492(V)<EIA>
500(H)x582(V)<CCIR> 510(H)x492(V)<NTSC>
500(H)x582(V)<PAL>
S/N Ratio [ More than 48dB(AGC off) ]
Electronic Shutter [1/60(1/50) to 1/100,000 sec]
Video Output [1.0 Vp-p composite, 75O]
Standard Pinhole Lens [f3.7mm / F2.0]
Lens Angle 90° 67.5°
Microphone[High sensitive]
Current Consumption 155mA (activated)
PIR Detection Range [100° with 10 meters (at 25° C) ]
Lamp Control Loading [1,250W (max) ]

PIR Alarm Output
[N.C./N.O., max loading 30Vdc, 0.5A]

Power Source
[DC12V±10%]

Ambient Operating Temperature
[-10° C ~+50° C]
Dimension 70(W) X 110(H) X 49(D) Gross Weight 230g 215g

 

 

 

 

BE-HOME BE-SMART
 
BE-HOME DEZIGN 2012