5 amp noise suppression filter - tube type - with 240V leads

5 amp noise suppression filter - tube type - in-line version

10 amp noise suppression filter tube type -  with 240V leads

10 amp noise suppression filter tube type - in-line version

5 amp noise suppression filter tube type - circuit breaker version - only with cables

Made in Australia for 240V conditions these amazing filters are used to bring high noise levels emmitted by appliances in the home like TV's plasma screens, fridges, AV equipment, fluro light circuits pumps etc. down to around 25MV so that X10 and A10 signals can travel to their destination every time. A must for most modern homes comtemplating X10 A10, PLC-BUS technology.

Filters may be installed behind the wall in-line or between an appliance and the GPO socket. For banks of fluro lights which are rated noisy simply locate the first point from the SAIX or DAIX, PLC-BUS or A10 module and insert the filter in-line. It's that simple!

This unit has a circuit breaker on board which can be reset by pushing the black button.

The 10 amp filter has a circuit breaker on board.
Push button to reset.

All filters output no noticeable heat over time.